Laser cutting of tube holes is out of the question because the surface finish of the tube holes will be of poor quality. To achieve the highest quality, all tube holes will be drilled to get the smoothest surface possible. Sliding the tubes through the baffles was never easier and without damaging the tubes. The edges of the tube holes will be de-burred before they are ready for quality control.

Baffles with a diameter of 8000mm can be drilled on one of the four MC Drill masters.

Baffle materials that are mainly processed: A516 Gr. 60/70 | A36 | A283 Gr. C | A240Gr 304/304L | A240Gr 316/316L